본문 바로 가기

로고

국내 최대 기계 및 로봇 연구정보
통합검색 화살표
  • MBD for ANSYS
  • 국내학술대회

    1 0
    국내학술대회 제목 게시판 내용
    제목(국문) 접촉단자의 재질에 따른 CNT기반 유연촉각 센서의 연결 특성에 관한 기초 실험
    제목(영문) Basic experiment on the connection characteristics of CNT-based flexible tactile sensor by the contact terminal materials
    저자 김호찬 (Ho Chan Kim ,안동대학교 기계자동차공학과 ) ▷공저자네트워크등록하기
    김진동 (Jindong Kim ,안동대학교 신뢰성교육연구센터 ) ▷공저자네트워크등록하기
    이인환 (In Hwan Lee ,충북대학교 기계공학부 ) ▷공저자네트워크등록하기
    초록
    초록(영문)

    Flexible tactile sensors based on CNTs are being actively researched because many applications are expected today. However, such a contact has a significant difference in contact performance depending on the type of terminal. Therefore, it is necessary to examine the reason for the difference in contact resistance due to some reasons, and experimental tests on commercially available terminals are necessary. For this purpose, the results of measuring and reviewing the resistance in each case are shown in this paper. As the material of the terminal, brass or phosphor bronze is most commonly used, and the available plating methods differ depending on each. It was confirmed experimentally that the variation of contact resistance became very large when printing the tactile sensor using 3D printing technology. This is due to the physical characteristics of the terminals, and through this experiment, we
    will present the differences in each material through this paper.

    keyword 3D 프린팅(3D Printing), 촉각센서(Tactile sensor), 다중벽카본나노튜브(MWCNT)
    저널명 대한기계학회 추계학술대회 ▷관련저널보기
    VOL 19
    PAGE 2158
    발표년도 2019
    국문File 국문다운로드
    영문File
    • 페이스북아이콘
    • 트위터 아이콘

    서브 사이드

    서브 우측상단1