본문 바로 가기

로고

국내 최대 기계 및 로봇 연구정보
통합검색 화살표
  • RecurDyn (리커다인)
  • 국내학술지

    156 0
    국내학술지 제목 게시판 내용
    제목(국문) 라운딩 펀치에 의한 프레팅 상태에서의 균열 해석
    제목(영문) Crack Analysis under Fretting Condition by Rounded Punch
    저자 김형규 (H.K.Kim ,한국원자력연구소 ) ▷공저자 네트워크 보기
    정연호 (Y.H.Jung ,한국원자력연구소 ) ▷공저자네트워크등록하기
    초록 Surface edge crack subjected to contact stresses is analysed. A punch with corner radii is considered to press the semi-infinite plane. Partial slip problem is solved when a shear force is applied to the punch. Dislocation density function method is used to solve the present mixed mode crack problem. The crack length of positive K1 is examined, which is affected by the ratio of the flat portion to the total width of the punch. Surface traction during one cycle of the shear force is evaluated to simulate the fretting condition. The compliance change of the contact surface is also investigated during the shear cycle. It is found that the crack grows during only a part of the cycle, which may be termed as effective period of crack growing. A design method for restraining the fretting failure is discussed, from which recommendable geometry of the punch is suggested.
    keyword Rounded Punch(라운딩 펀치), Stress Intensity Factor(응력확대계수), Partial Slip(부분미끄럼), Effective Period of Crack Growing (유효 균열성장 구간), Fretting Failure(프레팅 손상).
    저널명 대한기계학회논문집 A ▷관련저널보기
    VOL 24
    PAGE 1565-1574
    발표년도 2000
    원문파일 국문다운로드
    • 페이스북아이콘
    • 트위터 아이콘

    서브 사이드

    서브 우측상단1