국내 최대 기계 및 로봇 연구정보

국내학술대회

374

국내학술대회 제목 게시판 내용
제목(국문)	이유체 노즐의 액체이송 공기 공급방법에 따른 유량변화에 관한 연구
제목(영문)	Effects of Carner Air Supplying Parameters on the Variation of liquid Flowrate in Two-Fluid Nozzle
저자	조민호 (M. H. Cho ,전북대학교 ) ▷공저자네트워크등록하기 강신명 (S. M. Kang ,전북대학교 ) ▷공저자 네트워크 보기 김덕진 (D. J. Kim ,자동차부품연구원 ) ▷공저자 네트워크 보기 이지근 (J. K. Lee ,전북대학교 ) ▷공저자네트워크등록하기 노병준 (B. J. Rho ,전북대학교 ) ▷공저자네트워크등록하기
초록	The urea-selective catalytic reduction(SCR) system to reduce NOx emission needs the precise flowrate control to prevent ammonia slip, and the urea-water solution in the system is generally injected into the exhaust gas by the two-fluid nozzle with the adaptor that allows the carrier air supply. In this paper, the effects of carrier air supplying parameters on the variation of liquid flowrate in two-fluid nozzle were investigated by using the five times magnified nozzle adaptor model. The carrier air supplying positions and liquid-air supplying conditions were considered as the experimental parameters. The internal pressure of the adaptor and the flowrate issuing from the injection nozzle were measured at the liquid supplying pressure from 2 to 4 bar and carrier air supplying pressure from 1 to 3 bar. As the results from the experiment, the internal pressure of the adaptor and the flowrate issuing from the injection nozzle were varied with the carrier air supplying position and the differential pressure between the liquid-carrier air pressures.
keyword	Two-Fluid Nozzle(이유체 노줄), Adaptor(어댑터), Carrier Air(이송 공기), Assist Air(보조 공기)
저널명	한국자동차공학회 추계학술대회 ▷관련저널보기
VOL	7
PAGE	194-199
발표년도	2007
원문파일