국내 최대 기계 및 로봇 연구정보

기술보고서

기술보고서 게시판 내용
타이틀	An Experimental Investigation of Silicone-to-Metal Bond Strength in Composite Space Docking System Seals
저자	Gaier, James R.;; Siamidis, John;; Larkin, Elizabeth M. G.
Keyword	ADHESION;; BONDING;; COHESION;; CREW EXPLORATION VEHICLE;; ELASTOMERS;; ELECTROLESS DEPOSITION;; FAILURE MODES;; GROOVES;; LOADS (FORCES); MECHANICAL PROPERTIES;; NICKEL;; PHOTOMICROGRAPHY;; SEALS (STOPPERS); SILICONES;; SPACECRAFT DOCKING;; TENSILE STRENGTH;; VULCANIZING
URL	http://hdl.handle.net/2060/20100039315
보고서번호	NASA/CR-2010-216886
발행년도	2010
출처	NTRS (NASA Technical Report Server)
ABSTRACT	The National Aeronautics and Space Administration (NASA) is currently developing a new universal docking mechanism for future space exploration missions called the Low Impact Docking System (LIDS). A candidate LIDS main interface seal design is a composite assembly of silicone elastomer seals vacuum molded into grooves in an electroless nickel plated aluminum retainer. The strength of the silicone-tometal bond is a critical consideration for the new system, especially due to the presence of small areas of disbond created during the molding process. In the work presented herein, seal-to-retainer bonds of subscale seal specimens with different sizes of intentional disbond were destructively tensile tested. Nominal specimens without intentional disbonds were also tested. Tension was applied either uniformly on the entire seal circumference or locally in one short circumferential length. Bond failure due to uniform tension produced a wide scatter of observable failure modes and measured load-displacement behaviors. Although the preferable failure mode for the seal-to-retainer bond is cohesive failure of the elastomer material, the dominant observed failure mode under the uniform loading condition was found to be the less desirable adhesive failure of the bond in question. The uniform tension case results did not show a correlation between disbond size and bond strength. Localized tension was found to produce failure either as immediate tearing of the elastomer material outside the bond region or as complete peel-out of the seal in one piece. The obtained results represent a valuable benchmark for comparison in the future between adhesion loads under various separation conditions and composite seal bond strength.